Have a look at the official wiki page of The Alliance: 

    Multifactor authentication

Below you find some tips from me:

Connecting with multifactor authentication

Once multifactor authentication is activated for you you will see the following message when connecting to one of the clusters of The Alliance:

If you are using Duo Mobile you can now either

• open the Duo Mobile app, generate a new code and type it the terminal and then press 'Enter' or
  
• type '1' and then press 'Enter'. Then you will get a message in your Duo Mobile App asking you to confirm that it is really you who wants to connect.

Configuration to authenticate only once

By default you have to authenticate yourself every time you connect to one of the clusters of The Alliance. But you can configure the computer from which you want to connect to one of the clusters of The Alliance in a way so you will only have to authenticate your first connection but will not get asked to authenticate again for any following connections (from and to the same machine) for as long as your first connection exists and even up to 10 minutes afterwards.

Linux (UQAM servers) and Mac

When connecting from a Linux machine (like our UQAM servers) or from a Mac you can edit your file ~/.ssh/config. For example, if you want to connect to Narval you can add something the following to your ~/.ssh/config:

Replace 'username' with your username on Narval. The 'narval' above is just a name given to this "host". You can put here any name you like that does not already exist in your ~/.ssh/config.

Windows users

Check out the wiki of The Alliance:  Multifactor authentication

Automated workflows

Have a look at the official wiki page of The Alliance:

    Automation in the context of multifactor authentication

And here are some tips from me:

Contact The Alliance

First you need to contact The Alliance (support@tech.alliancecan.ca) and tell them what commands you want to execute (for example 'rsync') and what tools or libraries you will be using to manage the automation. They should get back to you with more information - or questions.

Once you have the okay from The Alliance to proceed you need to manage your SSH keys.

Manage your SSH keys

For this you can either use an SSH key you already have or create a new one.

Create a new SSH key

The specific process to generate an SSH key pair depends on the operating system you use. For the Windows PuTTY or MobaXterm clients, see Generating SSH keys in Windows. For a Unix-like environment (Linux, Mac, WSL or Cygwin), see Using SSH keys in Linux. 

Create a new SSH key for Linux (UQAM servers)

On any of our internal UQAM servers go into your ~/.ssh directory:

There you can generate it with the ssh-keygen command: 

When prompted with the question "Enter file in which to save the key (/home/username/.ssh/id_ed25519):" you can either just press enter or change the name to, for example:

    /home/username/.ssh/id_ed25519_transfer)

When asked for a passphrase and to repeat it you can just press enter. After this you should have the following two new files:

Upload your private SSH key to the CCDB

Log in on the following CCDB web site:
    https://ccdb.alliancecan.ca/ssh_authorized_keys

Paste your public SSH key (the content of the file ending on *.pub) in the field indicated. Then precede what you just pasted by:

Where "IP_address" is the IP address from which you want to connect and "command" is the command you would like to execute. The Alliance already provides a number of wrapper scripts which allow common actions. Have a look at their wiki:  Automation in the context of multifactor authentication under "Convenience wrapper scripts to use for command=".

For example, if you want to do automated transfers from Narval to UQAM or vice versa, you should put something like:
   

Then give or change the "Description" (optional but recommended) and click on "Add Key".

Issue commands without being asked for authentication

Once you did all the above correctly you can issue the commands you specified in the SSH key above without being asked for authentication. For example, you can now copy data from Narval to UQAM (issued from an internal UQAM server) with:

Again, for more information have a look at their wiki:  Automation in the context of multifactor authentication under "Using the right key".